Tony Kart Rotax Max
Hi – thought I’d write everything out, so I don’t miss anything. For some background, I started racing karts in 1997 and was full time karting until moving to cars in 2011. So when I decided to get a Rotax to play with I was pretty picky!
The kart is a 2016 Tony Kart, which I got in January last year. I stripped it right back to the frame and replaced everything that was needed. This included:
- All bearings in the front hubs and rear axle.
- Brake pads, magnets, screws, pistons, seals,retaining pin and locking bush
- Gaskets in the carb
- Fuel pipes all round
- Seat washers and spacer rubbers
- Floor tray fixings
- Track rod ends
- Replaced the gear oil in the engine
- Spark plugs
- Battery
- Fuel pump kit
- Rear bumper bolts
- Side pod clips
- HT lead
- Some cool 3D printed bits to cover the carb etc
Also got myself :
- Range of jets
- Couple of sprockets
- O-ring chains
- Various fluids and chain lube
You can see various photos on my Instagram and the latest story highlight is all the progress posts I made:
https://www.instagram.com/johnlangridge
https://www.instagram.com/stories/highlights/18295151872248446
I’ve only taken it out 2 or 3 times in all, so it’s good to go. It has always run chassis protectors and the frame is in great condition.
I had it all out in the garden this afternoon and the spares package includes the below. I didn’t get a chance to clean it all up but can do that at some point. Spares:
- Additional seat
- Additional full set of plastics, with all chrome bars
- Tyre bead breaker
- 2x additional sets of slicks on rims (one wheel is off a rim but I have spare front and rear rims too)
- 1x set wets not on rims
- 2x tyre bags
- Radiator that is a bit bent up but could get you out of trouble
- Steering wheel
- Chain lube x2
- Brakes bits and bobs
- Additional fuel pipe
- Clutch sprocket
- 86 tooth sprocket (for Bayford / Buckmore, it has 70 on it for Lydd)
- 2x spare chains (normal)
- 1x 112 link O-ring chain (106 O-ring on for Lydd)
- Various 3D printed caps for the carb, exhaust, engine etc
- Spark plug
- Exhaust sealant
- Various bolts and washers
- Spare rear bumper bolt kit
- 2x small seat stays
- Various seat kit washers, spacers, bolts and nuts
- 2 stroke oil
- 3x sprocket protectors
- More seat padding
- Plus the trolley is included too
I’m planning to advertise it at £2000. I’m pretty confident it’s a good package. All in all when I counted it up the kart owes me quite a bit over £2000!
You can see some photos from today here: https://drive.google.com/drive/folders/1_tKD9BxtI4_Q7pKl2eYAYxbFrMwn885f?usp=sharing
And the receipts that I have here: https://drive.google.com/drive/folders/1RjxNcGjHnW4r6gIMsklzyfBQtrY1Zqtn?usp=sharing
